Herse à dents Flex Harrow Green Way 5.3 m transformer neuve
Cette annonce vous intéresse ?
1/12
Marque:
Flex
Modèle:
Harrow Green Way 5.3 m transformer
Type:
herse à dents
Localisation:
Ukraine m.Dnipro
Mise en ligne:
19 avr. 2024
Identifiant dans le stock du vendeur:
10315
Description
Type:
pour tracteur
Largeur de couverture:
14 m
État
État:
neuf
Informations supplémentaires
Couleur:
vert
Important
L'offre est présentée uniquement à titre informatif. Veuillez contacter le vendeur pour plus d'informations.
Conseils concernant l'achat
Coordonnées du vendeur
Avers-Agro
En stock:
734 annonces
depuis 4 ans sur Agronetto
4.7
24 commentaires
Les numéros de téléphone ont été vérifiés
L'adresse a été vérifiée
crust breakdown and moisture retention in the soil;
weed control in the "white thread" stage;
even distribution of chopped straw and partial incorporation of crop residues (preservation of nitrogen in the soil);
reducing soil erosion;
soil preparation for sowing;
the cultivation of fallow lands (virgin lands);
steam processing;
incorporation of fertilizers into the soil.
flex harrow is used in different soil and climatic zones when processing soils of different texture with moisture up to 28% and hardness up to 3.5 MPa (35 kg / cm²), not clogged with stones, flagstone and other obstacles;
flex harrow are aggregated with wheeled and tracked tractors with engine power corresponding to the working width of a particular model;
the working body of the harrow - the tooth has a knife-like (rhombic) section and is made of high-strength steel. The approximate service life of the teeth is 8 hectares per tooth, which is approximately the distance covered by the tooth of 5000 km;
the rhombic section of the tooth, in comparison with the standard square section of the teeth, with which most harrows are equipped, allows, while ensuring all technological operations, to reduce the load on the tractor's tractive effort by up to 20%, which in turn allows the use of a tractor with a capacity of 80-370 hp. for aggregation with harrows with a working width of 5 to 24 m;
adjustment of the angle of attack of the teeth has 2 main positions: aggressive - 38 ° and passive - 50 ° and 4 additional positions;
the teeth are fixed on transverse rods, pivotally connected to each other in a 16-row train. And this, in turn, allows you to qualitatively copy the features of the relief during processing;
each 16-row train consists of two parts of 8 rows, which can be installed separately if necessary, for example, when the field is excessively clogged or the tractor is insufficiently powered;
the pitch of the tooth field when using a 16-row train is 15 mm, with a tooth width of 16 mm, i.e. with such an arrangement of teeth, 100% of the field area is processed.
Productivity at a speed of 12 km / h, ha / h ... 6.3
Working width of capture, m ... 5.28
Aggregation type ... trailed
Working length, m ... 9.36
Transport width, m ... 2.8
Transport height, m ... 3.7
Transport length, m ... 4.75
Working depth of tillage, mm ... 20-80
Number of loops, pcs ... 4
Number of loops during vineyard processing, pcs ... 2
Number of rows in a train, pcs ... 8 * 2 = 16
Number of standard teeth, pcs ... 352
Number of standard teeth for vineyard processing, pcs ... 160
Number of teeth on a length of 300 mm, pcs ... 20
Adjusting the angle of attack of the teeth ... 6 positions (2 main and 4 additional)
2 main positions ... 38 ° and 50 °
Tractor power not less, h.p. ... 88
Minimum number of hydraulic outlets ... 2
Pressure in the hydraulic system of the tractor, bar ... 180
Weight, kg ... 1910